Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Doubts about Time in IP Phone and IP Communicator

Hi Guys,

I have the following doubt: In CCM 4.2.1 the IP Phone take what time: The time & date or time zone configured in CCM machine? or It take the Date/Time Group configured in CCM?

I have the same doubt about IP Communicator, until where I know It take time of user machine, it's wright? There are differente between, for example GMT-4 Caracas and GMT-4 Manaus?

Thanks,

Wilson Santana

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Doubts about Time in IP Phone and IP Communicator

The Call Manager uses the servers time as a base and then offsets the time based on the Date/Time group. The combination of this is what is displayed on the phone.

3 REPLIES

Re: Doubts about Time in IP Phone and IP Communicator

The IP phones get their time from the Call Manager subscriber that they are registered to. That being said, Call Manager looks at the GMT timestamp based on the time of the subscriber and converts the offset based on the Date/Time group assigned to the device pool for the phones (IP Communicator included).

Example:

Subscriber Time: 11:42 PST (17:42 GMT)

Date/Time Group: GMT -4 Caracas

The phone would dispaly 15:42 (Caracas time)

New Member

Re: Doubts about Time in IP Phone and IP Communicator

Hi Adam,

I am sorry, but, not is clear for me.

Thanks,

Wilson

Re: Doubts about Time in IP Phone and IP Communicator

The Call Manager uses the servers time as a base and then offsets the time based on the Date/Time group. The combination of this is what is displayed on the phone.

126
Views
0
Helpful
3
Replies