Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

drop a call on PRI

Hello

sometimes on CCME I see long time incoming calls hanging on PRI.

I guess this is because a calling end did not hang phone handset correctly:

CallID          CID  ccVdb           Port             DSP/Ch  Called #   Codec    Dial-peers

0x114C7    133C 0x689C7C80 0/2/0:15.2       0/3:2    xxxxxxx    g711ulaw  1/4

0x114CB    133D 0x689C7C80 0/2/0:15.1       0/3:1   xxxxxxx    g711ulaw   1/4

How to drop such call on PRI?

1 ACCEPTED SOLUTION

Accepted Solutions

drop a call on PRI

You can manually clear the call using the command clear call voice causecode 34 id.

You can find the call id using show call active voice brief.

If you want prevent this issue you can study this doc:

http://docwiki.cisco.com/wiki/Cisco_IOS_Voice_Troubleshooting_and_Monitoring_--_Media_Inactive_Call_Detection

Regards.

2 REPLIES

drop a call on PRI

You can manually clear the call using the command clear call voice causecode 34 id.

You can find the call id using show call active voice brief.

If you want prevent this issue you can study this doc:

http://docwiki.cisco.com/wiki/Cisco_IOS_Voice_Troubleshooting_and_Monitoring_--_Media_Inactive_Call_Detection

Regards.

New Member

drop a call on PRI

thank you!

307
Views
0
Helpful
2
Replies
CreatePlease login to create content