Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DSP out of resource

Hi Expert,

I found the error "%FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally. Need to restart the router to retrieve call again.
I use 1xPVDM2-8 to support 3xVIC2-2E/M as DSP calculator recommended. The error was repeart intermittent. Kindly help to share any idea how can i fix this? Thanks

5 REPLIES
New Member

DSP out of resource

The best way to solve your problem-replace your DSP with PVDM2-64 for example.

What you think?

Also please,take a look for this topic.

https://supportforums.cisco.com/thread/288096?referring_site=kapi?referring_site=smartnav

New Member

DSP out of resource

Hi, Rojer-bkk!

Were you able to solve the problem with DSP out of resource for VIC2-2E/M?

I have the same situation - E/M, No dsps found either locally or globally. and only restart the router.

c2811, PVDM2-16, 2xVIC2-2E/M, c2800nm-advipservicesk9-mz.124-25d.bin

No conference bridge or no transcoder is configured on the router.

DSP out of resource

Hi,

I saw that error a couple of times before. I saw that error related to fax calls, the router using PVDM 3 tries to allocate DSP channel using Cisco FAX Relay, which is not supported on PVDM 3, and the call fails, in such scenario the fix is to apply:

voice service pots

fax rate disable

In this case PVDM 2 should not have this same behavior.

I agree that should be better to add additional DSP resources.

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
New Member

DSP out of resource

Thanks, but problem with PVDM 2.

We use the low-complex codec, G711ulaw,

Two VIC2-2E/M is four voice ports only. PVDM2-16.

Why need to add DSP? 

This is not single bug, We have about 20 branch office with E/M, and we need to reset one router per week approximately.

However, in the case of the VWIC2-1MFT-E1  - no problems.

Hall of Fame Super Gold

DSP out of resource

Update IOS.

831
Views
0
Helpful
5
Replies
CreatePlease to create content