Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DSP required ?

Hello, my CUCM cluster is connected to a gateway router (running CME). It connects to my ITSP via a SIP trunk.

There is no transcoding taking place, as I am using G711 in my CUCM  cluster and G711 is also being used for between the gateway and the  ITSP.

My question is does this gateway actually need a hardware DSP in order to get calls out to the ITSP and receive calls ?

Can you have functional VOIP gateways without any hardware DSPs installed ?

  • IP Telephony
1 REPLY
VIP Purple

DSP required ?

Hi,

Basically, DSPs are required if u have PSTN terminated on to your router like E1/T1 PRI or FXS /FXO cards inserted on to your router.

DSPs are also required if u are using Conference with G.729 Codec.

In your case, since u are using G711, no DSPs would be required.

regds,

aman

97
Views
0
Helpful
1
Replies