Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dspfarm nm-hdv2 and CME

Hi;

I have a configuration question about DSPfarms-NM-HDV2s- and Callmanager Express.

on voice gateway(hosting dspfarm)

-partial config-

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 10 transcode register MTPXXXXXXXXX

associate profile 11 conference register CFBYYYYYYYY

!

on CME(another router)

-partial config-

!

telephony-service

sdspfarm tag 1 MTPXXXXXXXXX

sdspfarm tag 2 CFBYYYYYYYY

!

On this configuration do X's and Y's must be the mac address of the interface defined on dspfarm hosting router with "sccp local fastethernetZ/T"?

Can MTPXXXXXXX and CFBYYYYYYY be anything we choose, as long as we define MTP and CFB resource with the same name as we did on router(dspfarm hosting) and on CME?

Thank You.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Dspfarm nm-hdv2 and CME

With NM-HDV2/PVDM2 you can set up any name you want. As long as the name in SCCP profile match with the name in telephony-service, it should work. With NM-HDV/PVDM-12 (first gen dsp;s) you had to match up the names with the mac-address prefixed by CFB or MTP.

HTH

Sankar

PS: please remember to rate posts!

2 REPLIES

Re: Dspfarm nm-hdv2 and CME

With NM-HDV2/PVDM2 you can set up any name you want. As long as the name in SCCP profile match with the name in telephony-service, it should work. With NM-HDV/PVDM-12 (first gen dsp;s) you had to match up the names with the mac-address prefixed by CFB or MTP.

HTH

Sankar

PS: please remember to rate posts!

New Member

Re: Dspfarm nm-hdv2 and CME

Thank you Sankar.

104
Views
10
Helpful
2
Replies
CreatePlease login to create content