Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dspfarm redundancy

dear sir,

We've cisco 3725 1 mgcp which have installed voice-card in to be act as dspfarm for resources.

Request: We've purchased new cisco 3825 with below specifications: -

Cisco3825-v/k9 - 3825 voice bundle , pvdm2-64,sp serv,64f/256d

vwic-2mft-t1/e1

pvdm2-64

cab-acu

s382spsk9-12403

please advise how to make it redundancy for dspfarm?

thanks.

2 REPLIES
Green

Re: dspfarm redundancy

Hi

_Hope u are fine, u want redundancy for which feature?

CFB or XCODER?

If u want redundancy in CFB u can create a CFB in CCM and use MRG and MRGL.

If u want redundancy in XCODER u need a different router that act as XCODER or create different profiles...and register them in CCM...

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edad7.html

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmcfg/b04mrgrp.htm#wp1030758

New Member

Re: dspfarm redundancy

hi gogasca & all,

i'm fine, thank you for your sharing.

I want redundancy for transcoder,dspfarm & cfb.

attached is the working configuration for existing environment.

We hope to add additional cisco 3825 with new nm & pvdm to create new resources. please advise the command should apply for the new cisco 3825 and at ccm .

We have ccm version 4.1(3)

thank you very much.

147
Views
4
Helpful
2
Replies
CreatePlease to create content