OK... this is kind of a newbie question. I've not done this before... but we had a 3845 with IOS 12.4(24)T2 that was on the network but not being used for any voice traffic (Communications Manager doesn't know about it). It was under utilized and we added some DSPs. We've configured the DSPFarm and have defined a profile for transcoding services.
We configured Communications Manager 6.1(2) with the same profile name (WTC-XCODE-CRT12) and have been through the configuration documents several times. When we perform a show dspfarm all we get:
Dspfarm Profile Configuration
Profile ID = 20, Service = TRANSCODING, Resource ID = 1 Profile Description : Profile Service Mode : Non Secure Profile Admin State : UP Profile Operation State : RESOURCE ALLOCATED Application : SCCP Status : NOT ASSOCIATED Resource Provider : FLEX_DSPRM Status : UP Number of Resource Configured : 10 Number of Resource Available : 10 Codec Configuration Codec : g711ulaw, Maximum Packetization Period : 30 Codec : g711alaw, Maximum Packetization Period : 30 Codec : g729ar8, Maximum Packetization Period : 60 Codec : g729abr8, Maximum Packetization Period : 60
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
And Communications Manager shows the status as "Unknown" and the IP address as "Unknown."
The one thing we've not done is defined this 3845 as any kind of gateway to Communications Manager. Is that required? If so, can we define it as an SCCP controlled gateway and if we do that is there any way to use the loopback interface. This 3845 is dual connected for redundancy and it seems like a limitation to have to choose ONE of the two Ethernet interfaces for binding interface.
And the right answer was.... Reset SCCP. Thanks mightyking! I would not have guess that a simple "no sccp, sccp" would have forced the association. Obviously I need to understand the association mechanism better. I assumed the SCCP would use the same polling parameters regardless of what type of application (phone, gateway, etc.) was in use. I thought that this 3845 would poll every x minutes (what ever the polling interval is) and discover the Communications Manager.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...