Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dspfarm

Humm.. I still need help...

Trying to configure the Moh .... I just can hear a bip bip ....

I already configured as configuration guide showed...

What's wrong ?

Thanks.

---

#sh run | begin scc

sccp local GigabitEthernet0/0

sccp ccm 10.2.41.22 identifier 1

sccp

!

sccp ccm group 1

bind interface GigabitEthernet0/0

associate ccm 1 priority 1

associate profile 1 register mtp002333b11be0

associate profile 3 register jcbcnf

associate profile 2 register jcbxcd

keepalive retries 5

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 5

associate application SCCP

!

dspfarm profile 3 conference

codec g711ulaw

codec g711alaw

R_JCB_22#show dspfarm all

Dspfarm Profile Configuration

Profile ID = 2, Service = TRANSCODING, Resource ID = 2

Profile Description :

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 5

Number of Resource Available : 5

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Dspfarm Profile Configuration

Profile ID = 3, Service = CONFERENCING, Resource ID = 3

Profile Description :

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 4

Number of Resource Available : 4

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Dspfarm Profile Configuration

Profile ID = 1, Service = MTP, Resource ID = 1

Profile Description :

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 5

Number of Resource Available : 5

Hardware Configured Resources : 5

Hardware Available Resources : 5

Software Resources : 0

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

1 1 1.1.1 UP N/A FREE mtp 1 - - -

1 1 1.1.1 UP N/A FREE mtp 1 - - -

1 1 1.1.1 UP N/A FREE mtp 1 - - -

1 1 1.1.1 UP N/A FREE mtp 1 - - -

1 1 1.1.1 UP N/A FREE mtp 1 - - -

1 1 1.1.1 UP N/A FREE xcode 2 - - -

1 1 1.1.1 UP N/A FREE xcode 2 - - -

1 1 1.1.1 UP N/A FREE xcode 2 - - -

1 2 8.4.7 UP N/A FREE xcode 2 - - -

1 2 8.4.7 UP N/A FREE xcode 2 - - -

1 3 1.1.1 UP N/A FREE conf 3 - - -

1 3 1.1.1 UP N/A FREE conf 3 - - -

1 4 1.1.1 UP N/A FREE conf 3 - - -

1 4 1.1.1 UP N/A FREE conf 3 - - -

Total number of DSPFARM DSP channel(s) 14

1 REPLY
Cisco Employee

Re: dspfarm

and exactly what are you trying to do?????????

if it's multicast MOH i don't see anywhere that config

i only see CFB and XCODER in there

also what you're mentioning is caused because the phone has no access to the MOH server thru the MRGL, not because of a config on the router.

you don't even mention if this is CUCM or CME so i'm going to assume it's CUCM

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
411
Views
0
Helpful
1
Replies
CreatePlease login to create content