03-11-2007 05:10 AM - edited 03-14-2019 08:24 PM
Phone time not updating. CM Server time is correct.
Running CM OS 4.4SR4, CM 4.2.3ES20
Solved! Go to Solution.
03-11-2007 07:24 PM
18 hours later and not all my java based phones are updated. All running newest code too. Oh well.
03-11-2007 08:03 AM
Hi Chris,
Can you try a **#** reset on your phone to see if it updates? This is a very slow process.
Rob
03-11-2007 08:05 AM
ok, did that... **#**, saw phone reset, but still shows an hour off :(
03-11-2007 08:06 AM
Yup, tried the **#**, I also physically unplugged the phone. No dice on either.
I did as Cisco suggested and reset all my phones, CCM service, and NTP service, but no help.
So far I only have one 7970 that has updated itself.
03-11-2007 08:10 AM
I assume restarting CCM service will cause a disruption... being a hospital I don't wnat to do anything thats going to cause service interruption if I can at all avoid it...
03-11-2007 07:58 AM
What CM and OS level are you running? Did you have to make any change for the updates to occur?
...I opened a tac case and Cisco told me to do the following (but it didn't work for me)
1. update device pool time zone to a new time zone, reset devices.
2. Change time zone back to correct, reset phones.
3. Reset CCM and NTP services on all CMs.
03-11-2007 08:02 AM
im running ccm 3.3.3
OSImage 2000 2.4
OS Service Release 2000-2-5sr4
I have a tac case open, but have not heard back yet... We are a hospital, so it will be very difficult to reset all phones...
Where do you reset the CCM and NTP services?
03-11-2007 08:09 AM
You can reset the CCM service from the CCM Services website or Windows services control panel, but the NTP service can only be reset via the Windows services control panel (start->run->services.msc)
03-11-2007 11:29 AM
I have 7960, 7940 that have not updated time, but all me 7970 phones have? Any Ideas anyone?
THX
03-11-2007 11:30 AM
Also **#** no longer works? Anyone know y?
03-11-2007 11:31 AM
On the newer loads, you need to hit the settings button first and then **#**.
03-11-2007 11:37 AM
Hi Kenton,
Press the Services button - then **#** This should work. This funtionality changed with later phone firmware loads.
Hope this helps!
Rob
03-11-2007 11:39 AM
Settings **#** works thanks
03-11-2007 12:55 PM
yeah, on the newer phone loads you need to go to a submenu (for example hit the services button) and then do **#** to reload.
03-11-2007 02:34 PM
In newer phone loads you need to press the "services" button first before the **#**.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide