Having Voice Mail retrieval issues with "Invalid UserID or password" when Nortel phone connects through the PIMG. PIMG trace captures show that DTMF digits are either not recieved or the PIMG sees duplicate digits (e.g. password is 1234, PIMG sees 124 or 12334). Anybody seen this before?
I have seen this issue twice and both times an upgrade to the dsp's resolved the issue. The two scenarios were a slightly different. The calls were coming from the pstn and to an ivr. The ivr would not recognize all of the dtmf digits or duplicate some of the entries. Sounds very similar to what you are experiencing.
Not sure if the issues are related. The only DSP resources in play here are located in the PIMG unit since it is making the TDM connection via 8 digital phone ports and converting to SIP for IP connectivity to Unity.
If you download upgrade software for your PIMG model -- some of the downloads include patching/upgrades for the PIMG DSP resources (i.e. the Dialogic Media Gateway upgrade zip has a file run_910FskEcho.dsp that contains the upgrade for DSP Firmware)
Check out the PIMG upgrade page for Unity (I hope that helps)
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4