Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Dual Line for 7911 in CUCM 7.1.5

Dear Frinds,

                We configured 7911-G IP Phone in CME using Dual Line.Now we want to integrate this IP Phones with Call Manager 7.1.5.But i am able to configure one Line for these IP Phone in Call Manager.I need to give two Line (two DN) for these IP Phone. How can i give the second DN in Call  Mnaager

Configuration for IP Phone in CME.
ephone-dn  44  dual-line
number 130 secondary 750
label 130
description ROOM210 FF
  name ROOM130
corlist incoming use900-international

ephone  44
device-security-mode none
mac-address 0025.84E0.BC9A
username "user130" password 80130
type 7911
button  1:44
  

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Dual Line for 7911 in CUCM 7.1.5

Hi Naisa,

I really like Davids idea here as it will approximate the "overlay" feature

of CME. +5 to David

Another way to accomplish this is to set up the second line as a CTI-RP

(CTI Route Point) within CUCM. Set the Call Forward All on the new CTI-RP

to Line 1 on the 7911.

In our example the 7911 has a DN of 7005 and you want it to also answer calls

for a second lin DN or 5522.

Set up a CTI-RP in CUCM for 5522 and set the CFWDALL on the DN config page

to go to 7005. All calls to 5522 will ring on the 7911 @ 7005.

Cheers!

Rob

2 REPLIES
Bronze

Re: Dual Line for 7911 in CUCM 7.1.5

Hi, there is not option to configure a secondary number for 7911 in CUCM 7.1. I guess you can use a translation pattern.

This is just a suggestion.

hth

David

Hall of Fame Super Red

Re: Dual Line for 7911 in CUCM 7.1.5

Hi Naisa,

I really like Davids idea here as it will approximate the "overlay" feature

of CME. +5 to David

Another way to accomplish this is to set up the second line as a CTI-RP

(CTI Route Point) within CUCM. Set the Call Forward All on the new CTI-RP

to Line 1 on the 7911.

In our example the 7911 has a DN of 7005 and you want it to also answer calls

for a second lin DN or 5522.

Set up a CTI-RP in CUCM for 5522 and set the CFWDALL on the DN config page

to go to 7005. All calls to 5522 will ring on the 7911 @ 7005.

Cheers!

Rob

1614
Views
5
Helpful
2
Replies
CreatePlease to create content