12-29-2008 01:02 AM - edited 03-15-2019 03:15 PM
Hi,
I need a Route Pattern that sends any dialed string beginning with '+' to a GW device. The error message is 'The first character cannot be a plus sign'.
Is there any workaround for this issue?
Regards,
John
12-29-2008 03:24 AM
What are you sending to ?, Is it OCS, MOC you could try ! as a route pattern. Bear in mind CUCM 7 now suports + You should not normally need to send + just the international prefix 001, 00 etc.
12-29-2008 05:54 AM
We have Nokia E Series native sip clients that dial E164 numbers and the CUCM needs to remove the + sign and replace it with a leading 0.
Found the answer in CM Systems Guide:
To configure the international escape character for supported patterns, make sure that you enter \+ in the pattern or Directory Number field.
adding the '\' sign in front of '+' resolved the problem.
12-29-2008 11:42 AM
Use transformation patterns for this. Take a look at latest CM SRND doc for more details on how to use normalization.
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: