Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

E&M card status - UP UP

Hi ,
I cannot confrim whether the e&m card are hardware faulty. The users cannot make outgoing call and recieve incoming call.
                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   idle     idle     y
1/0/1  -- e&m-imd    up    up   idle     idle     y
1/1/0  -- e&m-imd    up    up   idle     idle     y
1/1/1  -- e&m-imd    up    up   idle     idle     y
Thanks
Leung Che Man
2 REPLIES
Hall of Fame Super Gold

Re: E&M card status - UP UP

Probably just miswired or misconfigured, up indicates the card has seized the circuit.

If it was working before, reload the router.

New Member

Re: E&M card status - UP UP

Hi,

I have contacted the local PABX engineer to check the e&m wiring and reloaded the router. The status return to normal as follows and we can make call between other sites.


                                  IN      OUT
PORT   CH SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
====== == ========== ===== ==== ======== ======== ==
1/0/0  -- e&m-imd    up    up   seized   idle     y
1/0/1  -- e&m-imd    up    dorm idle     idle     y
1/1/0  -- e&m-imd    up    dorm idle     idle     y
1/1/1  -- e&m-imd    up    dorm idle     idle     y

Thanks

Leung Che Man

646
Views
0
Helpful
2
Replies