Hi experts. Pls help me sort out this issue. I know it will be just a matter of minutes for you guys so kindly spare this time.
I have following routers
1x2611Xm with NM-2V
1x2801 with Pvdm-8
Now i want to buy E1 cards to practice E1 channels and connections etc mainly for CCVP and if possible GWGK course also. I dont have any phone line or ISDN connection in my home. So all of the connections will be back to back. Can some one guide me with the appropriate part numbers for both 2611xm and 2801 pls ?
Anyway, if you can accomodate PVDM for both of the routers you can look for two VWIC-1MFT-E1 or VWIC-1MFT-E1/T1. But with PVDM2-8 you can configure 8 channels only out of 30 (which is enough for labbing) you need to take care of while considering design.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...