Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

E1 card

i have an NM-2CE1T1-PRI CARD.I would like to know if there is an equipment(modem or card) which could enable the router to receive E1 VOICE traffic?.I must say that an rj11 connector is coming from the telecom provider.

Hall of Fame Super Gold

Re: E1 card

Excuse me, you have been told already by more than one person that the card you reference doesn't support voice, and ask the same again ?

If you had not noted, that is a professional forum with multiple active contributors. I have never seen a case where wrong information was forwarded without a further correction by same or other person.

The same applies to your case, you have been given correct information, I'm sorry if that brings the bad news that you have to buy a new card and PVDM2 modules, but that is the way it is.

You have also been told that E1 comes in form of an RJ45 connector with 8 pins, not RJ11 with 6, so you should double-check what you have from the telecom provider.