E1 flap

[Ahmed Yassin]

My all outgoing calls sometimes come down after less than 1 minute.

I think that the reason of this issue is due to that E1 flap.

I made debug for the E1 and the results are attached.

So, if you please, if any one suggest what is the real reason and if it is from my router side or from the C.O. side.

[paolo bevilacqua]

Send "show controllers E1". Do not enable any other debugs.

[Ahmed Yassin]

Please, find attached sh controller e1 as per your request

[paolo bevilacqua]

Configure:

network-clock-select 1 e1 0/1/0

Then check again you must have 0 errors, 0 slips.

[Ahmed Yassin]

sorry, where can i find 0 errors, 0 slips.

Anf if so achieved, the line will not flap again

[paolo bevilacqua]

You must enter the command above first, then check later.

[Ahmed Yassin]

Thx a lot as i entered the command, and no error now.

But, now E1 will not flap again.

[paolo bevilacqua · Accepted solution]

Keep monitoring and please remember to rate useful posts with the scrollbox below.