Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

E1 Internet Acces

Hello,

 

Is there any chance or a way to know to configure and E1 to have Internet or WAN Access?

 

Thanks 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Hi.Here is a post where you

Hi.

Here is a post where you can take some tips.

 

https://supportforums.cisco.com/discussion/11878866/ccie-voice-lab-question#3996293

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"

Hi.Basically you need to

Hi.

Basically you need to configure your E1 Controller as per ISP specs than configure serial interface with desired encapsulation and treat the serial interface serial0/0/0:0 as a data interface.

 

Here is a useful link

 

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRspasw/asrcfgt1.html#pgfId-1175321

 

 

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
4 REPLIES
Cisco Employee

This is a voice forum, you

This is a voice forum, you should be posting this in a WAN forum.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Hi.Here is a post where you

Hi.

Here is a post where you can take some tips.

 

https://supportforums.cisco.com/discussion/11878866/ccie-voice-lab-question#3996293

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
New Member

Carlo, Thanks for you help,

Carlo,

 

Thanks for your help, but I have one more question, I don't see how I can do this configuration. Do you have any example to look at?

 

Thanks.

Hi.Basically you need to

Hi.

Basically you need to configure your E1 Controller as per ISP specs than configure serial interface with desired encapsulation and treat the serial interface serial0/0/0:0 as a data interface.

 

Here is a useful link

 

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRspasw/asrcfgt1.html#pgfId-1175321

 

 

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
26
Views
0
Helpful
4
Replies