I have been tasked with setting up cisco paging server. We have cucm and it came bundled with paging server or informacast. I have the server all setup as all is working at main office. Im having issues at my remote sites. The phones light up and get the tone, but no voice when paging.
My remote sites are currently setup using wireless bridges with 3560's from routing at each site. There is also a 2960 Poe at each site for the phones, 6921's. Phones are in vlan 3 . Call manager server is in vlan 50.
I need some guidance on how I go about implementing multicasting, which I believe is the reason why I am not getting voice at remote sites while paging.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...