Hi,
I have been tasked with setting up cisco paging server. We have cucm and it came bundled with paging server or informacast. I have the server all setup as all is working at main office. Im having issues at my remote sites. The phones light up and get the tone, but no voice when paging.
My remote sites are currently setup using wireless bridges with 3560's from routing at each site. There is also a 2960 Poe at each site for the phones, 6921's. Phones are in vlan 3 . Call manager server is in vlan 50.
I need some guidance on how I go about implementing multicasting, which I believe is the reason why I am not getting voice at remote sites while paging.
Thank you
