Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Enable Web Access on bulk Cisco 69XX

Hi all,

 

I have a problem for a big migration, i need enable the Web acces on my 69XX series. But when i use the enterprise phone configuration and common phone configuration the web access is not enable. only manual configuration on the phone works. And in the bulk this option is not present.

Do you have any idea for allow this parameters on all phone?

 

regards

 

Vincent

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Looks like other types of

Looks like other types of phones/models are included in the bulk selection(like CTI port etc). Look for 'Device Type' 'Contains' '6941'. This should only list out model 6941 phones and 'web access' enable should be available. If not, please provide more info on this-version of CM, number of phones, firmware etc.

-Sunil

3 REPLIES
New Member

Looks like other types of

Looks like other types of phones/models are included in the bulk selection(like CTI port etc). Look for 'Device Type' 'Contains' '6941'. This should only list out model 6941 phones and 'web access' enable should be available. If not, please provide more info on this-version of CM, number of phones, firmware etc.

-Sunil

New Member

I have worked on this issue,

I have worked on this issue, and is necessary to fixe at one modele of phone for modifiy this parameter.

 

Thank's for your help and patience.

 

regards

New Member

1. Through Enterprise phone

1. Through Enterprise phone configuration, we can enable web access for all the phones.

2. Through Bulk, we can enable web access for particular model / device pool of phone

(BAT --> phones -->update phones --> query)

305
Views
0
Helpful
3
Replies
This widget could not be displayed.