Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Enabling FAC on CME

Hi

How to enable FAC on cme or 00 calls

Please dind the below vg and cmd version

ios version: c2900-universalk9-mz.SPA.150-1.M3.bin

CME version :Version 7.1

please advise

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Enabling FAC on CME

Hi,

Raja,

CME 7.1 does not support FAC natively as far as I know. You will need to use TCL scripts to achive this. Here is a link to how this can be done using TCL script. The script is also provided and sample configurations. Please note that this TCL is not supported by cisco TAC,

ftp://ftpeng.cisco.com/sbcs/doc/CME-FAC-Code.zip

You can upgrade your cme to 8.5/8.6 and you can do FAC natively

Please rate all useful posts

"There is a wideness in God's mercy Like the wideness of the sea.There's a kindness in His justice Which is more than liberty"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
5 REPLIES
Blue

Re: Enabling FAC on CME

HI

Have you refered below link, it has configuration example.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html

Regards

Ronak Patel

Rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

Re: Enabling FAC on CME

Thanks Ronak

But looks i need to upgrade the cme  to 8.5 or above

is the 8.8 is stable version ?

planing to go  for that  with the ios version c2900-universalk9-mz.SPA.152-1.T2.bin

as per the below link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

plz advise

Blue

Enabling FAC on CME

Hi Raja,

My Apology for not seeing your CME version.

You need 8.5 and later versions.

I would suggest CME 8.6 with 15.1(4)M. As I believe Main line releases are better pick compared to T trains  if you do not need more feature.

Regards

Ronak Patel

rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
VIP Super Bronze

Enabling FAC on CME

Hi,

Raja,

CME 7.1 does not support FAC natively as far as I know. You will need to use TCL scripts to achive this. Here is a link to how this can be done using TCL script. The script is also provided and sample configurations. Please note that this TCL is not supported by cisco TAC,

ftp://ftpeng.cisco.com/sbcs/doc/CME-FAC-Code.zip

You can upgrade your cme to 8.5/8.6 and you can do FAC natively

Please rate all useful posts

"There is a wideness in God's mercy Like the wideness of the sea.There's a kindness in His justice Which is more than liberty"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Enabling FAC on CME

Hi

Shall i upgrade to 8.8 with the ios

c2900-universalk9-mz.SPA.152-1.T2.bin

and my vg is CISCO2901 it has 512dram/256 flash

484
Views
0
Helpful
5
Replies