Enabling FAC on CME

[RAJA RAHMAN]

Hi

How to enable FAC on cme or 00 calls

Please dind the below vg and cmd version

ios version: c2900-universalk9-mz.SPA.150-1.M3.bin

CME version :Version 7.1

please advise

[ronpatel]

HI

Have you refered below link, it has configuration example.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html

Regards

Ronak Patel

Rate helpful posts.

[RAJA RAHMAN]

Thanks Ronak

But looks i need to upgrade the cme  to 8.5 or above

is the 8.8 is stable version ?

planing to go  for that  with the ios version c2900-universalk9-mz.SPA.152-1.T2.bin

as per the below link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

plz advise

[ronpatel]

Hi Raja,

My Apology for not seeing your CME version.

You need 8.5 and later versions.

I would suggest CME 8.6 with 15.1(4)M. As I believe Main line releases are better pick compared to T trains  if you do not need more feature.

Regards

Ronak Patel

rate helpful posts.

[Ayodeji Okanlawon · Accepted solution]

Hi,

Raja,

CME 7.1 does not support FAC natively as far as I know. You will need to use TCL scripts to achive this. Here is a link to how this can be done using TCL script. The script is also provided and sample configurations. Please note that this TCL is not supported by cisco TAC,

ftp://ftpeng.cisco.com/sbcs/doc/CME-FAC-Code.zip

You can upgrade your cme to 8.5/8.6 and you can do FAC natively

Please rate all useful posts

"There is a wideness in God's mercy Like the wideness of the sea.There's a kindness in His justice Which is more than liberty"

[RAJA RAHMAN]

Hi

Shall i upgrade to 8.8 with the ios

c2900-universalk9-mz.SPA.152-1.T2.bin

and my vg is CISCO2901 it has 512dram/256 flash