Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

ephone changes

I need to make changes to a few ephones such as username and number, but the GUI will not allow this.

Is there a way through command line interface?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: ephone changes

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

Please remember to rate useful posts with the scrollbox below.

5 REPLIES
Hall of Fame Super Gold

Re: ephone changes

Of course. CLI is what you use for professional configuration, the GUI is mainly for users to set CFA from home and things like that.

New Member

Re: ephone changes

I figured out how to change the username for each ephone, but cannot remember how to change the User Number associated with it.

IE. Currently at 226. I want it to be 4279.

Hall of Fame Super Gold

Re: ephone changes

1. find on which DN tag the number is:

show ephone telephone 226

2. change number under said tag:

conf t

ephone-dn XX

number 4279

New Member

Re: ephone changes

Thanks.

I was using just ephone, not ephone-dn command.

Appreciate the help.

PS. I tried to find the Command Line Interface guide for v12.4 (UC520), and cannot locate it.

If you have a link, that would be great.

thanks again.

Hall of Fame Super Gold

Re: ephone changes

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

Please remember to rate useful posts with the scrollbox below.

116
Views
0
Helpful
5
Replies
CreatePlease to create content