Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Equivalent to "sh isdn ac" when using MGCP

When a voice gateway is in MGCP mode, "sh isdn ac" doesn't work.

Is there a way to get similar information ?

The closest I've come up with is "sh voice port sum" (Which isn't great)

Thanks,

GTG

Please rate all helpful posts.
2 REPLIES
Hall of Fame Super Gold

Re: Equivalent to "sh isdn ac" when using MGCP

With MGCP, call-control intelligence is taken away from the router, so its ability to tell you what's going on will become very limited.

So, either use H.323, or look into the CUCME for any kind of monitoring and statistics information.

Re: Equivalent to "sh isdn ac" when using MGCP

'show call active voice brief' can be helpful, but when the ISDN b-channel is back-hauled to CUCM there is no way for the gateway to know the ISDN details. So the gateway will know which ports are in use, but no calling/called numbers.

-nick

129
Views
0
Helpful
2
Replies
CreatePlease to create content