Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Error Parsing Kickstart Config : CUCM 9.1.2 Installation on VM

Hi all,

After getting done with the configuration, I got the following error, rebooting didn't help, either, any ideas?

errorparsingkickstartconfig.JPG

4 REPLIES

Error Parsing Kickstart Config : CUCM 9.1.2 Installation on VM

Hi Fikri.

Did you create a brand new virtual disk or you just used an old one?

Anyway try to recreate the virtual disk and try again.

If you can use the OVA template downlodable from cco

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

Error Parsing Kickstart Config : CUCM 9.1.2 Installation on VM

Hi Carlo,

We have increased the disk capacity and resolved the error, the installation went fine, but I did get another error, any ideas on this one?

Regards,

Fikri

Error Parsing Kickstart Config : CUCM 9.1.2 Installation on VM

Hi.

Check the virtual machine network settings and also , try to check if you are using a corrupted ISO.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

well, I get the problem when

well, I get the problem when I choose autonegotiate and the server cannot autonegotiate. So I try to not choose autonegotiate and this problem not occured at install.

Please check your ethernet already assign at VM
 

2127
Views
0
Helpful
4
Replies