Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error registering linksys SIP phones on CME

Hello,

I have some Linksys SPA941 and SPA921 SIP phones and I'm trying to setup a CME on a 2811 router with IOS: c2800nm-ipvoicek9-mz.124-24.T2.bin

The problem is the phones won't register on the CME, I also tried using X-lite and no luck either.

I keep getting this error:

VOICE_REG_POOL: Register request for (cisco) from (10.5.0.10)
VOICE_REG_POOL: Invalid destination pattern (cisco)

Here is the relevant part of my running-config:

=====================================

ip dhcp pool VOICE
   network 10.5.0.0 255.255.255.0
   default-router 10.5.0.1
   domain-name voice.ulbsibiu.ro
   dns-server 194.169.191.190
   lease 0 0 30
!
!
voice service voip
allow-connections sip to sip
fax protocol cisco
sip
  registrar server expires max 600 min 60
!
!
!
!
!
voice register global
mode cme
source-address 10.5.0.1 port 5060
max-dn 10
max-pool 10
authenticate register
!
voice register dn  1
number 1111
allow watch
name JAY
label 1111
!
voice register pool  1
id mac 000E.083B.6E9F
number 1 dn 1
dtmf-relay rtp-nte sip-notify
username cisco password cisco
codec g711ulaw
!
dial-peer voice 1 voip
destination-pattern 1111
session protocol sipv2
session target ipv4:10.5.0.1
session transport udp
codec g711ulaw
!

=============================

Can anyone help me out please?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Error registering linksys SIP phones on CME

Set authentication username and registration number to be all the same, eg 1111

3 REPLIES
Hall of Fame Super Gold

Re: Error registering linksys SIP phones on CME

Set authentication username and registration number to be all the same, eg 1111

New Member

Re: Error registering linksys SIP phones on CME

it works now!

thanks a lot!!!!!!! i've been searching for a solution for the past 3 days, I never thought it would be that simple

Hall of Fame Super Gold

Re: Error registering linksys SIP phones on CME

Thank you for the nice rating and good luck!

2034
Views
10
Helpful
3
Replies