I have a problem with my Call Manager trunking to Avaya. Calling to PSTN is routed to trunking Avaya with Pattern 0.!
the problem was if i dialed pattern to some our provider like 0878XXXXXXXX , the call was unsuccesfull. but for number of other provider was succesfull. I tried to monitor from RTMT and got this logs :
//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.12.3.16 on port 5060 index 2 with 363 bytes:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...