i can't register ip communicator with call manager, i installed Call Manager on wmware and i installed DHCP Server on windows server 2008.
When i configure static ip addres for PC, Ip communicator registed with Call Manager. But when i configure PC to recieve IP Address from DHCP Sever, ip communicator wasn't register with Call Manager ( I configured dhcp option 150 on Dhcp server).
I thinks some configure were wrong. Anybody help me.
Can you verify the subnet mask and gateway configured for your DHCP pool. Also, you won't need an option 150 configured for IP Communicator as you have to specify the TFTP server in the client, that's really only used for IP hard phones.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.