Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

error with configuration assistant with UC500

hi i am getting this error while i configure wireless in cisco configuration assistant.

5 REPLIES
Hall of Fame Super Gold

Re: error with configuration assistant with UC500

Hi,

for professional configuration results, please use CLI only. What is that you want to do with wireless and what is that doesn't work ?

New Member

Re: error with configuration assistant with UC500

thxx..

i want to configure wireless its in initial stage though i configured ssid and ip adress also but i am not able to detect it..

i checked docs on cisco also but they have very less on UC500.

also i have to configure three different network on UC500 but i am not able to get it.

can you help me out with some config

txx again..

Hall of Fame Super Gold

Re: error with configuration assistant with UC500

This is a working basic wireless config example:

interface Dot11Radio0

no ip address

!

ssid ucs520

!

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

!

interface Vlan1

no ip address

bridge-group 1

bridge-group 1 spanning-disabled

!

interface BVI1

ip address 10.0.97.1 255.255.255.0

New Member

Re: error with configuration assistant with UC500

thxx. but what is the need of BVI.

Hall of Fame Super Gold

Re: error with configuration assistant with UC500

The radio interface doesn't support routing. So what you do, is to use BVI to configure a subnet that includes both wired and wireless devices.

256
Views
4
Helpful
5
Replies
CreatePlease to create content