Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Errors in syslog

Hello.

I have CUCM 8.6.2.24901-1

There's messages in syslog every 10-20 seconds as follow:

ccm: 239607: CCM: Aug 06 2014 11:36:05.223 UTC : %UC_CALLMANAGER-3-DbInfoError: %[DeviceName=][ClusterID=CCM-Cluster][NodeID=CCM]: Configuration information may be out of sync for the device and Unified CM database

Is it a way to fix that error?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

yes. state is 2 on all nodes 

yes. state is 2 on all nodes
 

7 REPLIES
VIP Gold

Does dbReplication is fine

Does dbReplication is fine (stat 2) at all node ?

Suresh

New Member

yes. state is 2 on all nodes 

yes. state is 2 on all nodes
 

Cisco Employee

Do a "utils dbreplication

Do a "utils dbreplication repair all" on the publisher. This should fix it.

New Member

Hi, I have the same problem

Hi, I have the same problem in one of the subscribers, it has also the VM Memory around 90% and I don´t know if this could be the cause.

Could I have any problem if I run this during business hours?

 

Thank you!

Cisco Employee

Hello.I guess your

Hello.

I guess your dbreplication status on the cluster should be 2. This might be due to a mismatch in some tables.

Please do "utils dbreplication repair all" on the publisher. What this command does is to match tables with configuration between publisher and all other nodes and correct any mismatches. This should solve it.

New Member

repair didn't fix

repair didn't fix anything

xxxx:utils dbreplication runtimestate

DB and Replication Services: ALL RUNNING

Cluster Replication State: Replication repair command started at: 2014-08-06-19-24
     Replication repair command COMPLETED 541 tables processed out of 541
     No Errors or Mismatches found.

 

errors continue at the same rate

New Member

Re: repair didn't fix

Did you ever solve this issue?

I have the same problem after upgrade from 11.5SU1 to 11.5SU3.

Every 2 minutes this syslog message is generated, all DBs have the state 2 and are fine.

 

Any idea?

427
Views
0
Helpful
7
Replies
CreatePlease login to create content