Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Esker Fax Server From Field Fax issue

We are deploying Esker Deliveryware Fax Server. We are on CUCM 6.1 and we have all the faxing working internally and externally. Our problem is when we recieve faxes in our email, the from field is populated with a long string of characters as follows: TA:10.100.0.6:1720,TEL:106968106968,NAME:106968106968,106968106968 [IMCEAFAX-TA+3A10.100.0.6+3A1720+2CTEL+3A106968106968+2CNAME+3A106968106968+2C106968106968@rtiintl.com]

10.100.0.6 is our Call Manager Subscriber

106968 is the 6 digit internal ext associated with my fax line.

rtiintl.com is our domain.

Not sure where the rest of this info is coming from but we would like to have something in the "From" field like Esker Fax or something similar and not confusing to users.

If anyone can help with this, it would be greatly appreciated.

You can email any questions to rgonnella@rtiintl.com.

Thanks,

Rich

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Esker Fax Server From Field Fax issue

Why you complain here and not to Esker ?

3 REPLIES
Hall of Fame Super Gold

Re: Esker Fax Server From Field Fax issue

Why you complain here and not to Esker ?

New Member

Re: Esker Fax Server From Field Fax issue

We did complain to Esker, however they swore up and down that the problem was on the Cisco side. We have since had this issue resolved by Esker. It turned out to be a field in an XML document on the Esker server that was pulling the data.

Rich

Hall of Fame Super Gold

Re: Esker Fax Server From Field Fax issue

Thank you for clarifying.

Please remember to rate useful posts with the stars below.

876
Views
0
Helpful
3
Replies