Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Expansion Module with SIP CME

Hi, I hope you are all doing great.

I would like to know how to configure an expansion module with SIP in CME.

I actually have a 7965 and a 7916, the 7965 one is running SIP in CME 8.6. However I haven't found a way to configure an expansion module for this phone in CME SIP register pool.

Does anyone knows how to do this, I have extensively searched for Cisco documentation about this, but with no luck.

Thank you in advance.

Everyone's tags (3)
5 REPLIES
Cisco Employee

Expansion Module with SIP CME

Jose,

Does your 7965 has the latest phoneload ?


GP.

New Member

Re: Expansion Module with SIP CME

Yes it has the latest SIP firmware. 9.2.2 if I correctly remember.

However I can't find any command to enable the expansion module on the register pool of that phone. No  matter what the firmware is. Thanks

Hall of Fame Super Gold

Expansion Module with SIP CME

The moduloes will work only on a SCCP phone. That will also give you many more features and flexivbility compared to the many limitation of SIP phones.

New Member

Expansion Module with SIP CME

Thanks, Paolo but unfortunately the client requested SIP for all their phones, we already explained them the limitations and restriction, but he chose to go anyway with SIP in all phones.

So I would like to know if there is some workaround to make these expansion modules work with SIP.

Hall of Fame Super Gold

Re: Expansion Module with SIP CME

You can tell your customer that either they accept the many limitations (no workaround), or use SCCP as CIsco recommends.

687
Views
0
Helpful
5
Replies