cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
388
Views
0
Helpful
1
Replies

Extension Assigner Failing?

NicP270591
Level 1
Level 1

Hi all,

I have a situation where I have followed the install guide for CME EA at the following link, and no issues occured,

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmexasgn.html

However, I dial the extension number for the application (after the phones have registered with their temporary DN's), the app picks up but is silent and immediately auto-terminates the call after less than one second.

Ideas?

Thanks!

1 Accepted Solution

Accepted Solutions

Gajanan Pande
Cisco Employee
Cisco Employee

From the initial description, the issues appears to be codec mismatch. Pls ensure that you have configured the codec properly between the app/phones.

Remember to rate helpful posts, pls.


GP.

View solution in original post

1 Reply 1

Gajanan Pande
Cisco Employee
Cisco Employee

From the initial description, the issues appears to be codec mismatch. Pls ensure that you have configured the codec properly between the app/phones.

Remember to rate helpful posts, pls.


GP.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: