What is the best way for Extension mobility users who move to different sites to use the local gateway for external calls. I know if can be done but for the life of me cant find out how to set it up. Obviously it can be done through route groups if the event of failure but all I want to do is User A from Site A goes to site B, how do I send his call out site Bs gateway if he is an EM user. My setup by the way makes the line/device approach difficult so have to stick with the 'old fashioned' CSS/PT method
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...