Extension mobility - Choose device profile based on physical location
Is it possible to associate more than one device profile to a user and so that when user logs from a phone in network x.x.x.x it uses automatically profileA and when user logs from a phone in network y.y.y.y it uses automatically profileB?
Re: Extension mobility - Choose device profile based on physical
you can create multiple profiles for a single user, however the system won't automatically select the proper profile based on the physical location
what you could do though. you can implement the device-line approach configuration which will resolve this issue. and local route groups
with device line aproach on the CSS assign to the phone you will allow un restricted dialing, local to the site, however on the CSS assigned to the line you will do the Calls of Restriction by blocking the calls that you don't want the user to dial
so when the user roams from site to site, the CSS assigned to the phone will allow the teleworker to use the local resouces, and the CSS assigned to the profile will prevent the user from dialing that are restricted for the user
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.