Hi, thanks for your speedy response. We use a mixture of 7960s and 7961s and they do support multiple lines. However when trying to set up the device profile I cannot see an options to add a second line. Can you advise me on how to do this please?
Check the phone button template that the Extension Mobility profile is referencing to make sure that two line appearences / DNs can be configured. The default phone button template for the 7960/61 allows for 2 DNs to be configured. If the phone button template only has one line change it or add a new one that allows for more than one DN to be configured.
Change the phone button template on EM profile to one that supports two lines and that will open up more line on the EM profile. Just like said in the other post, if the end-user phone into which you login has more than one line then this should work.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...