I migrated from CUCM 6.X to 9.1, Migration was successful with successful database restore, I changed the IP and Hostname of the server and server reboot automatically successfully, when the server came up i saw the extension moblitiy service and i changed from old ip address to the new ip add of the CUCM also i upadated the subscription in the phones service window which took a long time but updated successfully,
I am able to see the service on phone on pressing the service button when publisher is up and i am able to login also but when i shut the publisher and switchover to subscriber and when i press the service button the phone keeps on requesting the service and nothing happens...... I restarted the EM service,also updated the subscription on the subscriber but no results.
Is it the database replication issue??? or something else
Well the link is very good to explain,but i have a doubt , the link you provided is saying DNS record name, dNs record name means you are saying me to add a FQDN for the publisher for ex ( email@example.com) with 2 Ip address of (pub+sub).
If i create a redundant services one pointing to publisher and the other pointing to subscriber, it will work??? is it the best practice of configuring in such a way.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...