Note that when SRST and EM are on at the same time, the phone will be stuck with a previously logged in user's profile because there is no logout/login prompt for a new user to login when in SRST mode.
No EM login during srst
If a EM user is not logged in to a phone, the DN of that user is unknown
for the SRST router in fallback mode. In order to get around that, you
are trying to use 'default-destination 901732746839'. If we take a look
What u are trying to confirm is that the IP phones which have already logged in thorugh Extension mobility will keep on working , when WAN link goes down & phones register to SRST mode with same directory number.Hence, IP phone users can work internally seamlessly.
Secondly, Users from the outside PSTN world won't be able to make call to IP phone users . To make Analog phone work connected on FXO port of Voice Gateway router , we need to configure default destination number command.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...