because there is no dhcp and dns server here so i configured cisco router as a dns server (but no dhcp server configuration i configured ip phones manually) and done the following config on cisco router
config)# dns server
config)# ip host CCMIP 10.0.0.1 10.0.0.2
i also entered the dns server IP manually in IP phones as well as CUCM server (by using command set network dns [primary/secondary] <ip address>). Even then i am getting error of "Host not found".. am i missing something or there is another way to configure it.
Re: Extension Mobility Service Redundancy Configuration (urgent)
There is issue of dns resolution.. because when i used dns server (router) on my pc its even not resolving the ip...following is the thing which i did.
there are 3 routers connected to a switch (R1 220.127.116.11 acting as host, R2 18.104.22.168 as dns server, R3 22.214.171.124 ip i want to ping)... Following si the R1 config...
R1(config)#ip name-server 192.168.3.80
R1(config)#ip domain name yourdomain.com
following is the R2 (dns server) config
R2(config)# ip dns server
R2(config)# ip domain name yourdomain.com
R2(config)# ip host ccmip 126.96.36.199
and configured only IP on R3 router when on R1 i ping ccmip.. the ping is successful.. but when i replace pc with R1.. the ping is unsuccessful...R2 is unable to resolve the address.. there is no domain system.,..
can check at ip phones what is the problem so i used pc as the host....missing some domain configuration or sth..I opened a case for it lets see what hapens....
tell me about your config.. you just entered the name in the dns server .. mentioned the domain name (for eg. abc.com) manually in the phone and it worked!!!!!!
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...