I was wondering if anyone has experienced issues with locales with Extension Mobility profiles?
I have just upgraded a customer from CUCM 8.0.3 to 10.0.1.10000-24
The lastest UK Locale cm-locale-en_GB-10.0.1.1000-1
All CUCM servers where rebooted starting with the Publisher after the install of the local took place.
All phones ( no extension mobility) hear the UK locale but any phone that has extension mobility profile logged in regardless of model heres the US locale. All the defaults are set to use UK network and user locales also the users and device profile are set to use the UK locales. This also worked no issues before the upgrade.
What's the firmware version running on the phones? There are locale installation files for phones as well based on firmware, so if there was a change of firmware, you would have to install the UK locale file for the upgraded firmware of the phones as well.
Odd issues pop up if both CUCM and phone locales are not correctly installed.
See screenshot from the phone. Seems it's running the correct locale. This issue happens only to extension mobility profiles but on all model of phones. I haven't added the combined network locale. Do you think that could be the reason?
Did you find a fix for this issue, we've just done an upgrade to CUCM System version: 10.0.1.10000-24 from 7.1.5 and have exactly the same issue. I've even set the locale on the UDP to UK English but the logged in user still gets the prompts in US English. When the user logs out of the phone, any messages are heard in UK english.
Same locale version shows as installed on the phone.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...