Extension Mobility: unable to enter Credentials in the phone
I setup extension mobility in Call manager but I am having a problem with the login. When i hit the services button i displays extension mobility but there is no place to enter the credintial information. I am running CUCM 8.6.1. I have ensured that extension mobility service is running on both publisher and subscriber, I have reset the Call manager service that is said i must when I activated the extension mobility in service paramaters. I have created the extension mobility phone service using http://<ipaddr>:8080/emapp/E<AppServlet?=#DEVICENAME#, xml service standard IP Phone Service and check enable. I built the device profile for hte phone. I have configured the user I have allowed control from CTI made my profile controlled. I have enabled device mobility selected the primary device. I have configured the phones to enable extension mobility and subscribed to extension mobility.
However there is no place to enter the login on the phone.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...