I am having a problem with extension mobility on CCM 612 Business Edition. I can log on to the phone no problem. When I try to logout, i am unable too. I select extension mobility service and it just sits in the requesting state and fails to log the phone out. Has anyone come across this before?
Has this ever worked before or is this the first time the feature is being used? Can one log in and out successfully on other phones or other phone models? Does it log out successfully when the logout is initiated from the phone configuration page in ccmadmin? If EM has just recently been enabled on the phone, try resetting the phone and then trying to log in and out again.
Go to phone configuration page for the device, uncheck the box for extension mobility and save the configuration, then re-check the box for the extension mobility. Now log into EM, the then see if you can log out.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...