Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Extra 0's in caller Id

Hi there,

I got an issue about incoming call IDs on screen of my Cisco IP Phone. When someone calls me then I see always a couple of 0?s as prefix to incoming call. Sometimes it?s 2 0?s (zeros) en sometimes 3 0?s (zeros). I hope this will be more clear with the following example:

Caller: 0619540331

Called: 0205745897

Jun 5 13:21:51.655: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x3222

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98393

Exclusive, Channel 19

Calling Party Number i = 0x2183, '619540331'

Plan:ISDN, Type:National

Called Party Number i = 0xA1, '205745897'

Plan:ISDN, Type:National

Sending Complete

Jun 5 13:21:51.667: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB222

Channel ID i = 0xA98393

Exclusive, Channel 19

On my phone?s screen I see ?00619540331? as Caller ID. And sometimes I see it like this ?000619540331? on my screen. I hope someone can help me t solve this issue. I?m using CallManager 5.0.

Cheers,

Yasa

104
Views
0
Helpful
0
Replies