Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FAC (Forced Authentication Code) adding to Number when press redial button on 9971 with CUCM 7.1

Hi All,

good morning,

hope all of you doing well.

I have a problem with my CUCM 7.1 and Cisco 9971 IP Phone.

IP Phone 9971 have International Calling Priviliage with FAC ( Forced Authentication Code ) Enabled .

When Dial Number  9. 001 123- 456- 789 , and Enter FAC 3355 call establishing successfully.

when redial it again its shwoing on Display 9.001 123-456-789-3355 and getting message call can't be completed.

CUCM version 7.1

9971 Firmware : 9971 .9.0.2

Please guide me....!!!

Have a Good day...!!!

3 REPLIES
Cisco Employee

FAC (Forced Authentication Code) adding to Number when press red

i think you are hitting this

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsb68946

FAC numbers should be presented as *, instead of the actual code, to be
routed properly.

Hope this helps
Niket
New Member

FAC (Forced Authentication Code) adding to Number when press red

Dear Nik,

I think you answered for me , while type FAC code 3355 , insted of showing **** it showing number (3355) itself.

My problem,


When Dial Number  9. 001 123- 456- 789 , and Enter FAC 3355 call establishing successfully.

when redial it again its shwoing on Display 9.001 123-456-789-3355 and getting message call can't be completed. Because no such number exist.

Thanks , Waiting for your reply.....!!!!

Midhun

Cisco Employee

FAC (Forced Authentication Code) adding to Number when press red

Hi Midhun,

THis is an enhancement request as of now, i dont see a fix for this as of now..

Hope this helps

Niket

433
Views
0
Helpful
3
Replies