Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Facing problem in MLA parameter configuration on Cisco Call Mananger 4.1

Hi!

I want to configure read only access for my client in the Call Manager.

Now to do this we have to enable MLA parameter. But in the Cisco TAC case collection it shows that there are issues when MLA is enabled .

Kindly reefr the links mentioned below.

1. http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K13072010

2. http://www.cisco.com/warp/public/707/cisco-sa-20060118-ccmpe.shtml

So do let me know the solution on this.

1 REPLY
Hall of Fame Super Red

Re: Facing problem in MLA parameter configuration on Cisco Call

Hi Rajesh,

For the reference the in TAC Case collection, the "work-around" is nicely shown, so this should not be an issue.

For the vulnerability issue in the second doc, you need to make sure that you are at one of the "fixed-in" versions;

4.1

4.1(2)ES55 4.1(3)ES32

4.1(3)SR2 or later

Hope this helps!

Rob

103
Views
0
Helpful
1
Replies