Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Fail to Change the Interdigit Timeout Value in Cisco Gateway

Hello Everybody

 

I have this call flow:

 

PSTN (FXO) --> TCL File | Gw (H323) --> CUCM --> IP Phone

 

I have next Dial-peer in Gateway whith .T pattern:

dial-peer voice 101 voip
 translation-profile outgoing test
 destination-pattern .T
 session target ipv4:10.1.1.12
 dtmf-relay h245-alphanumeric
 no vad

 

Please your help to reduce the interdigit timeout value because 10 seconds are too long.

I have tried this:

 

In the voice port:

voice-port 0/1/0
 timeouts interdigit 2

 

Under Telephony Service:

telephony-service
 timeouts interdigit 2

 

Under H323:

h323
  h225 timeout t302 2

 

No option worked. Some suggestion??

Thanks in advance!

 

2 REPLIES
Cisco Employee

what is the role of tcl

what is the role of tcl script ?

what happens if you call the ip phone directly ?do you face the same delay 

Hello javelkur, thanks for

Hello javelkur, thanks for answer.

 

The TCL is the Cisco TCL IVR Script (its-CISCO.2.0.2.0.tcl).

If I call the ip phone directly is the same issue.

 

Thanks in advance.

115
Views
0
Helpful
2
Replies