Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

failed to Connect softphon to SIP Gateway

Hi Guys,

Kindly I configured my Cisco Router 3700 as CallManager, using SIP protocol, but we trying to connect from SoftPhone (using ZOIPER) i get error no route to destination my configuration is

-----------------------------------------------------------------------------------
R1#show  version
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 28-Apr-09 16:14 by prod_rel_team

ROM: ROMMON Emulation Microcode
ROM: 3700 Software (C3725-ADVENTERPRISEK9_IVS-M), Version 12.4(15)T9, RELEASE SOFTWARE (fc5)

Basra uptime is 3 hours, 1 minute
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 3725 (R7000) processor (revision 0.1) with 249856K/12288K bytes of memory.
Processor board ID FTX0945W0MY
R7000 CPU at 240MHz, Implementation 39, Rev 2.1, 256KB L2, 512KB L3 Cache
3 FastEthernet interfaces
3 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity enabled.
55K bytes of NVRAM.
16384K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2142
--------------------------------------------------------------------------------------

R1#show running-config
Building configuration...

Current configuration : 1855 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
ip cef
!
!
!
!
no ip domain lookup
!
multilink bundle-name authenticated
!
!
!
!
voice service voip
allow-connections sip to sip
sip
registrar server expires max 1200 min 300
!
!
!
!
!
!
!
!
!
!
!
!
!
voice register global
mode cme
source-address 192.168.3.1 port 5060
max-dn 5
max-pool 5
create profile sync 0001010036138206
!
voice register dn  1
number 1000
call-forward b2bua busy 100
call-forward b2bua noan 100 timeout 20
allow watch
name TEST
label 123456789
!
voice register pool  1
id mac 000C.2932.B096
number 1 dn 1
dtmf-relay sip-notify
username test password test
codec g711ulaw
!
!
!
!
!
!
!
archive
log config
hidekeys
!
!

!
!
interface FastEthernet0/1
ip address 192.168.3.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet1/0
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
-------------------------------------------------------------------------------------------
Log ZOIPER SoftPhone is

23:49:42 Registering user 'test@192.168.3.1:5060'
23:49:43 Failed registration  for 'test@192.168.3.1:5060' with cause 'no route to destination'
23:49:44 Registering user 'test@192.168.3.1:5060'
23:49:45 Failed registration  for 'test@192.168.3.1:5060' with cause 'no route to destination'
23:49:45 Failed registration  for 'test@192.168.3.1:5060' with cause 'no route to destination'
23:49:49 Failed registration  for 'test@192.168.3.1:5060' with cause 'no route to destination'
23:49:53 Failed registration  for 'test@192.168.3.1:5060' with cause 'no route to destination'
23:49:54 Unregistering user 'test@192.168.3.1:5060'
-------------------------------------------------------------------------------------------

Pleas can anyone till me whats gone on ? thanks for support. :thankyou:

1 ACCEPTED SOLUTION

Accepted Solutions

Re: failed to Connect softphon to SIP Gateway

Hi Sabah

On Zoiper as username and display name use 1000 and username test as authorization name

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
2 REPLIES

Re: failed to Connect softphon to SIP Gateway

Hi Sabah

On Zoiper as username and display name use 1000 and username test as authorization name

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

failed to Connect softphon to SIP Gateway

Hi Carlo,

very thanks about reply, now the connection done successfully .

1491
Views
0
Helpful
2
Replies
CreatePlease to create content