Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Failed to magrating 7940 ip phones between 2 clusters remotely

Just failed to magrating 7940 ip phones between 2 cluster yesterday

Some information of 2 clusters

Cluster A has just been upgraded from 6.1.2 to 8.6.2-21900 , and Cluster B upgraded from 8.5.1 to 8.6.2- 21900.

Cluster A used for the Shanghai Office , Cluster B used for others cities

We planned to magrate about 40 7940 iphones and 100 6921 iphones registered in Cluster A to Cluster B  but finally failed.

following is what we had done .

1  changed "PREPARE CLUSTER FOR ROLLBACK TO PRE 8.0 “ from false to true  in CUCM A

2  restarted TVS and TFTP service

3  reset those  iphones

4   change the DHCP settings on the remote SWITCH

as the result ,  all 6921  IP phones  successfully magrated between 2 clusters but 7940 failed

Is there any mistakes we made  or some other points we should take attention??

Everyone's tags (5)
4 REPLIES
New Member

Failed to magrating 7940 ip phones between 2 clusters remotely



New Member

Failed to magrating 7940 ip phones between 2 clusters remotely

Hi

Try delete CTL/ITL files manually in 7940 ip phones!

New Member

Failed to magrating 7940 ip phones between 2 clusters remotely

hi pqcristovam

  i have not  fund CTL/ITL files in 7940 ip phones..

  i had just test for magrating 7940 ip phone  between 2 clusters in the lab of Shanghai office successfully, but failed in the remote office with the same way.

Blue

Failed to magrating 7940 ip phones between 2 clusters remotely

Hi,

You can find video in below post for deleting CTL file

https://supportforums.cisco.com/message/3313999#3313999.

If you do not have CTl file. You can reset your ip phone to factory default and register to new CUCM cluster.

Regards

Ronak Patel

rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
1262
Views
0
Helpful
4
Replies