Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Failover\fallback on SIP trunk

Hi!

Really a noob when it comes to SIP trunks and I am not sure how to set up fallback from one SIP trunk to another? I am running CUCM 8.0.3 and we are running SIP trunks between 2 Trio servers. In the SIP trunk config I only have the possibility to add one IP adresse and I can't add a sIP trunk in "route Group" like I have done with the E1 on the Gateways.

So.....anyone out there that can point me in the right direction?

Regards

Eirik

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Failover\fallback on SIP trunk

Eirik,

You can certainly add SIP trunk to a route group, but you fist need to remove it from any route patterns that reference it directly. 

HTH,

Chris

2 REPLIES
Hall of Fame Super Silver

Failover\fallback on SIP trunk

Eirik,

You can certainly add SIP trunk to a route group, but you fist need to remove it from any route patterns that reference it directly. 

HTH,

Chris

New Member

Failover\fallback on SIP trunk

You are so correct Thank you so much!

343
Views
0
Helpful
2
Replies
CreatePlease to create content