Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

fast question: how to make an extension that call all the phones ?

Hey all,

how to make an extension that call all the phones OR a bunch of selected phones ?

Thanks in advance

note: 12.4(11)XW2 / CME 4.2(0)

1 REPLY

Re: fast question: how to make an extension that call all the ph

You could do this with a shared line. For example:

(Portions of config omitted)

ephone-dn 1

number 1000

ephone-dn 2

number 1001

ephone-dn 3

number 1002

ephone 1

button 1:1 2:3

ephone 2

button 1:2 2:3

In this example, 1002 is a shared line on both phones. When you call 1002, both phones ring. If you don't want the directory number to appear on the phones, you could also configure the shared line as an overlay. For example:

ephone 1

button 1o1,3

ephone 2

button 1o2,3

Hope this helps. If so, please rate the post.

Brandon

98
Views
5
Helpful
1
Replies